Publications

The AMCA stocks and supplies various publications including publications from NEBB and SMACNA in the USA

 
 
Building Systems Analysis and Retrofit Manual – CD Version
ASB028-CD
$70.00$110.00
 
Reference   ASB028-CD
Title Building Systems Analysis and Retrofit Manual – CD Version
Edition
Details as per above description in CD version
Member $ 70.00
Non-member $ 110.00

Building Systems Analysis & Retrofit Manual
ASB028
$55.00$95.00
 
Reference   ASB028
Title Building Systems Analysis & Retrofit Manual
Edition 2nd Edition, 2011, 144 pages
Details The second edition of the Building Systems Analysis and Retrofit manual provides methods to assess the major energy using elements of an existing building – electrical (lighting and motors) and HVAC. It provides a process that begins with a walk-through audit. Methods discussed include using building systems automation, envelope improvements and demand control strategies including thermal energy storage. Contractors interested in new opportunities will find market entry guidance and ideas to assist them in the development of new business strategies that target the renovation of existing buildings. Existing buildings are often located near public transportation and development typically occurs on a building’s existing footprint. These two “green” drivers may combine with basic economic factors to produce a compelling incentive for many prospective building owners to choose renovation of an existing building over the construction of new facilities.
Member $ 55.00
Non-member $ 95.00

HVAC Systems – Commissioning Manual – CD Version
ASB027-CD
$45.00$75.00
 
Reference   ASB027-CD
Title HVAC Systems – Commissioning Manual – CD Version
Edition
Details as per above description in CD version
Member $ 45.00
Non-member $ 75.00

HVAC Systems Commissioning Manual
ASB027
$35.00$65.00
 
Reference   ASB027
Title HVAC Systems Commissioning Manual
Edition 1st Edition, 1994, 180 pages
Details Commissioning is the process of ensuring the HVAC system meets the owners operational requirements. The process works effectively for projects both large and small, simple as well as complex. It applies to the commercial industrial and institutional markets. It is a practical how-to guide for contractors, owners and engineers interested in learning about commissioning for new buildings and recommissioning for existing buildings. Separate chapters are devoted to the different levels of commissioning, including basic, comprehensive and critical system commissioning. A thorough explanation of recommissioning leads one through the preliminary investigation, survey and documentation phase, the design and installation of system modifications, and the actual recommissioning test. The appendix contains a sample HVAC Systems Commissioning Specification, complete from the planning to the final execution stage. Additionally the topics functional performance testing, operator training, MSDS forms and equipment data sheets and O&M manuals are covered. It also includes sample reports and timesaving pre-start and start-up checklists. Use of these tested and proven sample forms and specification will save hours of valuable time.
Member $ 35.00
Non-member $ 65.00

Thermoplastic Duct (PVC) Construction Manual – CD Version
ASB026-CD
$70.00$130.00
 
Reference   ASB026-CD
Title Thermoplastic Duct (PVC) Construction Manual – CD Version
Edition
Details
Member $ 70.00
Non-member $ 130.00

Thermoplastic (PVC) Construction Manual
ASB026
$60.00$110.00
 
Reference   ASB026
Title Thermoplastic (PVC) Construction Manual
Edition 2nd Edition, 1995, 146 pages
Details Contains the latest and most useful information from manufacturers, fabricators, and corrosion specialists on the use and application of thermoplastic materials. This fully illustrated manual provides full construction details and standards for PVC ducts of 2", 4", and 10" w.g. positive and negative. It gives guidance in understanding these synthetic materials, as well as assistance in determining their strengths, corrosion resistance and advantages over other materials. A model specification enables one to easily prepare custom project documents for installation of PVC air handling systems. Also covered are polypropylene and polyethylene, CPVC, LDPE, HDPE, UHMW, ABS, Acrylics, and PVDF. Includes soft metrics.
Member $ 60.00
Non-member $ 110.00

Seismic Restraint Manual: Guidelines for Mechanical Systems – CD Version
ASB025-CD
$95.00$185.00
 
Reference   ASB025-CD
Title Seismic Restraint Manual: Guidelines for Mechanical Systems – CD Version
Edition
Details as per above description in CD version
Member $ 95.00
Non-member $ 185.00

Seismic Restraint Manual: Guidelines for Mechanical Systems
ASB025
$85.00$170.00
 
Reference   ASB025
Title Seismic Restraint Manual: Guidelines for Mechanical Systems
Edition 3rd Edition, 2008, 202 pages
Details The Seismic Restraint Manual: Guidelines for Mechanical Systems, 3rd edition 2008, ANSI/SMACNA 001-2008, is an updated set of guidelines that shows designers and contractors how to determine the correct restraints for sheet metal ducts, piping and conduit, so that they are more likely to remain attached to the building during an earthquake. The manual shows how very low and very high-risk areas of the country can be accommodated. Includes a more extensive list of bracing options and complies with current building codes all within a single document for user convenience.
Member $ 85.00
Non-member $ 170.00

Round Industrial Duct Construction Standards – CD Version
ASB024-CD
$245.00$480.00
 
Reference   ASB024-CD
Title Round Industrial Duct Construction Standards – CD Version
Edition
Details as per above description in CD version
Member $ 245.00
Non-member $ 480.00

Round Industrial Duct Construction Standards
ASB024
$205.00$405.00
 
Reference   ASB024
Title Round Industrial Duct Construction Standards
Edition 2nd Edition, 1999, 648 pages
Details This American National Standard (ANSI) expands the scope of the 1977 version, updating original text to incorporate a revised theory of design, new materials and more “user friendly” tables. Offers a standardised engineered basis for design and construction of industrial ducts of Classes 1 to 5. Includes a spiral duct chapter for Classes 1 and 2, covers design pressures ranging from 30”wg negative to 50” wg postive, plus carbon and galvanised steel tables. Changes to the manual included expanded tables for stainless steel and aluminium, expanded tables for duct sizes up to 96” in diameter, introduction of a new Duct Class 5 for systems handling corrosives and spiral lockseam pipe. As alternatives to table use, the publication has a manual calculation procedure using equations and fully developed examples. Includes soft metrics.
Member $ 205.00
Non-member $ 405.00

Rectangular Industrial Duct Construction Standards, Metric (SI) Version – CD
ASB022-CD
$245.00$480.00
 
Reference   ASB022-CD
Title Rectangular Industrial Duct Construction Standards, Metric (SI) Version – CD
Edition 2nd Edition, 2007, 444 pages
Details This version of the Rectangular Industrial Duct Construction Standards, 2nd edition (2007) is uniquely identified as the SI version (Metric – le Systéme International d’Unités) to differentiate it from the version published in 2004 as the IP version (Inch Pound). This latest publication is based on the exact same theoretical work and scope of the earlier IP version. What differs greatly between the two publications is that in the SI version the data is expressed in metric units and the ratings are based on the use of materials produced under and to ISO standards, in both strength and physical dimensions (we refer to this methodology as Hard Metric). This characteristic makes the information directly usable in the international market.
Member $ 245.00
Non-member $ 480.00

Rectangular Industrial Duct Construction Standard
ASB022
$245.00$480.00
 
Reference   ASB022
Title Rectangular Industrial Duct Construction Standard
Edition 2nd Edition, 2004, 448 pages
Details This second edition expands the scope of the 1980 version, updating original text to incorporate a revised theory of design, new materials and more “user friendly” tables. Included are new tables for stainless steels and aluminium, plus expanded chapters on materials, welding practices and a guide specification. It covers the simple, low or moderate temperature and pressure (or vacuum) indoor systems as well as the more complex outdoor systems that operate at moderate to high temperature and pressure (or vacuum) and are subject to higher and more complex external loading. Approved as an American National Standard (ANSI/SMACNA 002-2011)
Member $ 245.00
Non-member $ 480.00

Kitchen Ventilation Systems & Food Service Equipment Guidelines – CD Version
ASB020-CD
$60.00$110.00
 
Reference   ASB020-CD
Title Kitchen Ventilation Systems & Food Service Equipment Guidelines – CD Version
Edition
Details as per above description in CD version
Member $ 60.00
Non-member $ 110.00

Kitchen Ventilation Systems & Food Service Equipment Guidelines
ASB020
$55.00$95.00
 
Reference   ASB020
Title Kitchen Ventilation Systems & Food Service Equipment Guidelines
Edition 1st Edition, 2001, 199 pages
Details A basic reference guide to industry-accepted practices for fabrication and installation of commercial kitchen ventilation systems and custom-built food preparation equipment. Assists the designer, contractor and code officials in understanding the complexities of designing, installing, construction and balancing both the exhaust and make-up air systems required in commercial kitchen ventilation. The food service equipment section offers practical guidelines for designing, fabricating, evaluating and installing a wide range of custom-built food service equipment. Includes tables, shelves and wall lining details as well as minimum dimension and metal thickness standards for constructing light, medium and heavy-duty kitchen equipment that should provide owners with years of trouble-free usage. Developed in accordance with ANSI/NSF-2-1996. Also included is an appendix that provides application details for the seismic bracing of food service equipment.
Member $ 55.00
Non-member $ 95.00

Indoor Air Quality – A Systems Approach – CD Version
ASB018-CD
$70.00$130.00
 
Reference   ASB018-CD
Title Indoor Air Quality – A Systems Approach – CD Version
Edition
Details as per above description in CD version
Member $ 70.00
Non-member $ 130.00

Indoor Air Quality – A Systems Approach
ASB018
$60.00$110.00
 
Reference   ASB018
Title Indoor Air Quality – A Systems Approach
Edition 3rd Edition, 1998, 170 pages
Details This new manual is an update to the Indoor Air Quality (IAQ) manual. It provides for a system type approach to identifying and solving IAQ concerns, while introducing the fundamentals of IAQ. The manual also updates the technical aspects of IAQ with regard to typical contaminants found in todays facilities. Other topics covered are testing and identification and source mitigation. Timesaving IAQ tracking forms can be modified to meet specific contractor needs.
Member $ 60.00
Non-member $ 110.00

HVAC Duct Systems Inspection Guide – CD Version
ASB017-CD
$75.00$150.00
 
Reference   ASB017-CD
Title HVAC Duct Systems Inspection Guide – CD Version
Edition
Details as per above description in CD version
Member $ 75.00
Non-member $ 150.00

HVAC Duct Systems Inspection Guide
ASB017
$65.00$125.00
 
Reference   ASB017
Title HVAC Duct Systems Inspection Guide
Edition 3rd Edition, 2006, 158 pages
Details Contains guidelines for inspection of commercial HVAC duct systems for compliance with SMACNA/ANSI HVAC Duct Construction Standards, Metal and Flexible, (3rd Ed.) and Fibrous Glass Duct Construction Standards (7th Ed.). It reviews materials and reinforcement of duct systems, as well as assembly and supports of ducts. The Fire, Smoke and Radiation Damper Guide (5th Ed.) also summarizes installation details. Checklists are included for ductwork and fire dampers. Valuable as a study guide for the HVAC Duct Construction Standards manual and for learning inspection procedures in general. Includes soft metrics.
Member $ 65.00
Non-member $ 125.00

HVAC Systems – Testing, Adjusting & Balancing – CD Version
ASB016-CD
$100.00$195.00
 
Reference   ASB016-CD
Title HVAC Systems – Testing, Adjusting & Balancing – CD Version
Edition
Details as per above description in CD version
Member $ 100.00
Non-member $ 195.00

HVAC Systems Testing, Adjusting & Balancing
ASB016
$85.00$170.00
 
Reference   ASB016
Title HVAC Systems Testing, Adjusting & Balancing
Edition 3rd Edition, 2002, 407 pages
Details This new version has been extensively updated from the 1993 version and includes all of the many changes that have taken place in the HVAC industry. New sections covering VFD, DDC, lab hood exhaust balancing, and the latest changes in balancing equipment and procedures are included.
Member $ 85.00
Non-member $ 170.00

HVAC Systems – Applications – CD Version
ASB015-CD
$90.00$180.00
 
Reference   ASB015-CD
Title HVAC Systems – Applications – CD Version
Edition
Details as per above description in CD version
Member $ 90.00
Non-member $ 180.00

HVAC Systems Applications
ASB015
$85.00$155.00
 
Reference   ASB015
Title HVAC Systems Applications
Edition 2nd Edition, 2010, 442 pages
Details Focuses primarily n the advancement of HVAC systems technology, with increased emphasis on energy efficiency and the emergence of green and sustainable building. Provides guidance for HVAC system selection, operation and design. Covers the fundamentals of space condition requirements and explains how the various types of air, hydronic and refrigeration HVAC system designs can be applied to buildings. Individual chapters detail system information for controls, multizone, dual duct, terminal reheat, variable air volume, induction and special applications such as dedicated outside air and thermal energy storage.
Member $ 85.00
Non-member $ 155.00

HVAC Systems Duct Design – CD Version
ASB012-CD
$100.00$195.00
 
Reference   ASB012-CD
Title HVAC Systems Duct Design – CD Version
Edition
Details as per above description in CD version
Member $ 100.00
Non-member $ 195.00

HVAC Systems Duct Design
ASB012
$85.00$170.00
 
Reference   ASB012
Title HVAC Systems Duct Design
Edition 4th Edition, 2006, 392 pages
Details The fourth edition of HVAC Systems Duct Design presents the basic methods and procedures required to design HVAC air distribution systems. This manual provides the HVAC system designer detailed information on duct design and US and metric units are provided in all examples, calculations and tables. In addition to the basic engineering guidelines for the sizing of HVAC ductwork systems, the manual also provides related information on materials, methods of construction economics of duct systems, duct system layout, pressure losses, fan selection, duct leakage, acoustic considerations and Testing, Adjusting and Balancing (TAB).
Member $ 85.00
Non-member $ 170.00

HVAC Duct Construction Standards – Metal & Flexible – CD Version
ASB011-CD
$110.00$215.00
 
Reference   ASB011-CD
Title HVAC Duct Construction Standards – Metal & Flexible – CD Version
Edition
Details as per above description in CD version
Member $ 110.00
Non-member $ 215.00

HVAC Duct Construction Standards – Metal & Flexible
ASB011
$95.00$185.00
 
Reference   ASB011
Title HVAC Duct Construction Standards – Metal & Flexible
Edition 3rd Edition, 2005, 390 pages
Details The third edition of the HVAC Duct Construction Standards - Metal & Flexible is intended primarily for commercial and institutional duct construction. This American National Standard (ANSI/SMACNA 006-2006) contains tables and details for constructing ductwork for 1/2" to 10" wg positive and negative pressures. This edition improves upon the second edition with expanded pressure class tables, separate tables for TDC/TDF construction and expanded tables for round construction including 6"wg positive adn negative pressure and sizes up to 96". New in this edition is an engineering and design chapter to provide additional information to design professionals, double wall construction details, new casing construction details and additional accessory items. The standard is applicable for construction using uncoated steel, galvanized adn stainless steels and a limited range of aluminium ducts. This standard has been adopted in the ICC International Mechanical Code. Includes soft metrics.
Member $ 95.00
Non-member $ 185.00

HVAC Air Duct Leakage Test Manual – CD Version
ASB1143-CD
$55.00$100.00
 
Reference   ASB1143-CD
Title HVAC Air Duct Leakage Test Manual – CD Version
Edition
Details as per above description in CD version
Member $ 55.00
Non-member $ 100.00

HVAC Air Duct Leakage Test Manual
ASB1143
$45.00$85.00
 
Reference   ASB1143
Title HVAC Air Duct Leakage Test Manual
Edition 2nd Edition, 2012, 122 pages
Details This American National Standard, ANSI/SMACNA 016-2012, covers revised leakage criteria and builds on the proven methods for testing ductwork for air leaks from the first edition. Contains updates to the expected leakage rates for ductwork constructed to the SMACNA HVAC Duct Construction Standards – Metal & Flexible, duct leakage test procedures, recommendations on use of leakage testing, types of test apparatus and test set up and sample leakage analysis. Includes a new educational chapter for designers and specifiers, to aid in the specification and implementation of duct leakage and testing methods. The PDF will be available at a later date.
Member $ 45.00
Non-member $ 85.00

Residential Comfort System Installation Standards Manual – CD Version
ASB1689-CD
$55.00$105.00
 
Reference   ASB1689-CD
Title Residential Comfort System Installation Standards Manual – CD Version
Edition
Details as per above description in CD version
Member $ 55.00
Non-member $ 105.00

Residential Comfort System Installation Standards Manual
ASB1689
$50.00$90.00
 
Reference   ASB1689
Title Residential Comfort System Installation Standards Manual
Edition 7th Edition, 1998, 150 pages
Details This publication incorporates complete and comprehensive installation standards for residential heating and cooling systems. The manual incorporates the current technology available for contractors and designers to provide a state-of-the-art system. Sections include load calculations, duct design, duct construction, insulation, vents, air terminals, control applications, system specifications and other updated industry equipment and methods for residential systems. Also covered are forced air heating, heat pumps, automatic control thermostats, flues and sound and vibration. Includes soft metrics.
Member $ 50.00
Non-member $ 90.00

Guide for Free Standing Steel Stack Construction – CD Version
ASB1572-CD
$60.00$110.00
 
Reference   ASB1572-CD
Title Guide for Free Standing Steel Stack Construction – CD Version
Edition
Details as per above description in CD version
Member $ 60.00
Non-member $ 110.00

Guide for Free Standing Steel Stack Construction
ASB1572
$50.00$95.00
 
Reference   ASB1572
Title Guide for Free Standing Steel Stack Construction
Edition 3rd Edition, 2011, 96 pages
Details Contractors, designers and engineers will find this guide a very valuable resource, as tables containing hundreds of stacks are detailed and ready to go. This new publication updates the 1996 Guide for Steel Stack Construction, second edition, incorporating text and tables. New to the 2011 publication are design considerations for free standing stacks under resonant vibration, established limits on stacks fitted with testing platforms, larger stack selection diameters and consideration of custom designed anchoring systems instead of a standardised schedule. Includes tables for selection of free standing stacks from 20 feet to 120 feet high and diameters to 120 inches, companion flange, stiffener sizes and stacks with access ladders and platforms. The PDF version will be available at a later date.
Member $ 50.00
Non-member $ 95.00

Fire, Smoke & Radiation Damper Installation Guide for HVAC Systems – CD Version
ASB1819-CD
$55.00$100.00
 
Reference   ASB1819-CD
Title Fire, Smoke & Radiation Damper Installation Guide for HVAC Systems – CD Version
Edition
Details as per above description in CD version
Member $ 55.00
Non-member $ 100.00

Fire, Smoke & Radiation Damper Installation Guide for HVAC Systems
ASB1819
$45.00$85.00
 
Reference   ASB1819
Title Fire, Smoke & Radiation Damper Installation Guide for HVAC Systems
Edition 5th Edition, 2002, 142 pages
Details The new edition has been updated from the 1992 edition and includes updated code references, NFPA references, and expanded guideline notes as to the details of damper installation. The appendices on smoke control and smoke detectors have been revised to reflect the current technology and requirements for those applications.
Member $ 45.00
Non-member $ 85.00

Fibrous Glass Duct Construction Standards – CD Version
ASB1884-CD
$75.00$140.00
 
Reference   ASB1884-CD
Title Fibrous Glass Duct Construction Standards – CD Version
Edition
Details as per above description in CD version
Member $ 75.00
Non-member $ 140.00

Fibrous Glass Duct Construction Standard
ASB1884
$65.00$120.00
 
Reference   ASB1884
Title Fibrous Glass Duct Construction Standard
Edition 7th Edition, 2003, 88 pages
Details The updated 88-page manual provides the performance characteristics for fibrous glass board as determined by the North American Insulation Manufacturers Association (NAIMA) and Underwriters Laboratories (UL) as well as specifications for closures and illustrations of how to construct the full range of fittings. Also covered are details for connections to equipment and air terminals, hanger schedules, reinforcement requirements, fabrication of rectangular duct and fittings, closures of seams and joints, channel and tie rod reinforcements, plus hangers and supports. For 2 w.g. or less. Metric units have been provided in a more convenient format, as well as an updated inspection checklist.
Member $ 65.00
Non-member $ 120.00

Ducted Electric Heat Guide for Air Handling Systems – CD Version
ASB1079-CD
$35.00$60.00
 
Reference   ASB1079-CD
Title Ducted Electric Heat Guide for Air Handling Systems – CD Version
Edition
Details as per above description in CD version
Member $ 35.00
Non-member $ 60.00

Ducted Electric Heat Guide for Air Handling Systems
ASB1079
$25.00$45.00
 
Reference   ASB1079
Title Ducted Electric Heat Guide for Air Handling Systems
Edition 2nd Edition, 1994, 42 pages
Details A comprehensive application and installation guide of ducted electric heaters and important factors relating to application, selection, location, installation and control.
Member $ 25.00
Non-member $ 45.00

Accepted Industry Practice for Industrial Duct Construction – CD Version
ASB1108-CD
$75.00$140.00
 
Reference   ASB1108-CD
Title Accepted Industry Practice for Industrial Duct Construction – CD Version
Edition
Details as per above description in CD version
Member $ 75.00
Non-member $ 140.00

Accepted Industry Practice for Industrial Duct Construction
ASB1108
$65.00$120.00
 
Reference   ASB1108
Title Accepted Industry Practice for Industrial Duct Construction
Edition 2nd Edition, 2008, 210 pages
Details This handbook is a compilation of accepted industry practices and construction techniques having received wide acceptance for the fabrication and installation of industrial duct systems. Covers round (long-seam and spiral) duct from 4in. to 60in. in diameter, reinforced and unreinforced, for operation from 4in. to 20in. wg positive or negative pressure, and from ambient to 650°F for carbon or stainless steel, 400°F for galvanised steel and 120°F for aluminium. Also rectangular duct fabricated from panels from a few inches to 5ft wide, all welded, Pittsburgh, grooved seam pipe lock or standing seam joined duct, for operation from 4in. to 20in. wg positive or negative pressure, and for the same materials and temperature limits as round duct. Also includes chapters on industrial applications, material properties, hangers and supports, fittings, vents, doors, discharge ducts (small stacks) and surface preparation of metals.
Member $ 65.00
Non-member $ 120.00

IAQ Guidelines for Occupied Buildings Under Construction
ASB029
$60.00$125.00
 
Reference   ASB029
Title IAQ Guidelines for Occupied Buildings Under Construction
Edition 2nd Edition, 2007, 131 pages
Details The SMACNA IAQ Guidelines for Occupied Buildings Under Construction, 2nd edition ANSI/SMACNA 008-2008, is intended as an authoritative source of project management guidance in maintaining satisfactory indoor air quality (IAQ) of occupied buildings undergoining renovation or construction. Covers how to manage the source of air pollutants, control measures, quality control and documentation, as well as communication with occupants. Includes example projects, tables, references, resources, and checklists; plus more extensive appendices, references, resources, planning and inspection checklists, and model specifications. Offers guidance on HVAC equipment early start-up and duct cleanliness for new construction. Methods to identify and remediate lead, asbestos, or other materials that are classified as hazardous materials are not intended to be within the scope of this standard. The new edition includes a more extensive set of information appendices than the previous edition that provide more references, resources, planning and inspection checklists, model specifications, HVAC equipment early start up guidance and the DUCT CLEANLINESS FOR NEW CONSTRUCTION - all within a single document for user convenience. FILE SIZE - 992KB
Member $ 60.00
Non-member $ 125.00

IAQ Guidelines for Occupied Buildings Under Construction – CD Version
ASB029-CD
$70.00$130.00
 
Reference   ASB029-CD
Title IAQ Guidelines for Occupied Buildings Under Construction – CD Version
Edition
Details as per above description in CD version
Member $ 70.00
Non-member $ 130.00

Thermoset FRP Duct Construction Manual
ASB032-CD
$30.00$120.00
 
Reference   ASB032-CD
Title Thermoset FRP Duct Construction Manual
Edition 1st Edition, 1997, 208 pages
Details SMACNA contractors researched the current and future potential use of fiberglass reinforced plastic (FRP) duct as well as its physical properties, to provide contractors, architects, engineers, managers, and plant owners with this authoritative resource that can be relied upon for the proper selection, manufacture, and installation of FRP duct systems. Covers design procedures for the manufacture and installation of round duct systems ranging from 4 to 72 inches in diameter and rectangular duct systems ranging from 12 to 96 inches in width and depth, operating at a static pressure within a range from -30 to +30 inches w.g. and within a temperature range from ambient to 180° F. Includes soft metrics.
Member $ 30.00
Non-member $ 120.00

Thermoset FRP Duct Construction Manual – CD Version
ASB032-CD
$35.00$140.00
 
Reference   ASB032-CD
Title Thermoset FRP Duct Construction Manual – CD Version
Edition
Details as per above description in CD version
Member $ 35.00
Non-member $ 140.00

Energy Systems Analysis & Management Manual
ASB033
$65.00$125.00
 
Reference   ASB033
Title Energy Systems Analysis & Management Manual
Edition 1st Edition, 1997, 344 pages
Details Presents an updated level of technical information necessary for energy conservation and retrofits of todays commercial facilities. Provides building owners, facility managers, contractors, and system designers with the tools needed to evaluate an existing facility for energy savings potential. Items of special interest include performance contracting, CFC refrigeration regulation, and new automation system open protocols. Other topics covered include HVAC heat recovery, energy auditing, operation and maintenance and indoor air quality.
Member $ 65.00
Non-member $ 125.00

Energy Systems Analysis & Management – CD Version
ASB033-CD
$75.00$150.00
 
Reference   ASB033-CD
Title Energy Systems Analysis & Management – CD Version
Edition
Details as per above description in CD version
Member $ 75.00
Non-member $ 150.00

Guidelines for Roof Mounted Outdoor Air Conditioner Installation
ASB034
$20.00$40.00
 
Reference   ASB034
Title Guidelines for Roof Mounted Outdoor Air Conditioner Installation
Edition 2nd Edition, 1997, 28 pages
Details Contains guidelines for installation of roof-mounted outdoor air-conditioner equipment as developed by SMACNA and the Air-Conditioning & Refrigeration Institute (ARI). To be used as a supplement to the unit manufacturers specific installation instructions. This booklet of waterproofing illustrations and reminders covers curb and roof penetrations and sealings, as well as the interface between the roof and the location at which the unit, piping, electrical wiring or sheet metal ductwork pass through the roof. This guideline supersedes ARI Guideline B-1986.
Member $ 20.00
Non-member $ 40.00

Standard Practice in Sheet Metal Work
ASB038
$110.00$215.00
 
Reference   ASB038
Title Standard Practice in Sheet Metal Work
Edition Reprint of 1st Edition, 1929, 768 pages
Details More than a historical look at custom architectural sheet metal, this publication contains a graphic collection of system designs, including pattern layouts representing the Old World practices in the industry that have been developed over generations and proven over decades of use. With today’s emphasis on restoration, refurbishing, rebuilding, retro-designs and retrofitting, architects will find this publication more than of historical interest. Architectural sections include elaborate cornices, skylights, domes, spires, spun balusters, gargoyles, marquise, storefronts, metal buildings and metal roofs. Additional chapters cover heating and ventilation systems including gravity furnaces. Blowpipe sections cover design, layout, construction and equipment.
Member $ 110.00
Non-member $ 215.00

Accepted Industry Practices for Sheet Metal Lagging
ASB039-CD
$50.00$95.00
 
Reference   ASB039-CD
Title Accepted Industry Practices for Sheet Metal Lagging
Edition 1st Edition, 2002, 128 pages
Details This document contains accepted industry practices for the fabrication and installation of sheet metal lagging, used to cover and protect insulated areas of equipment. The fabrication practices included illustrate the requirements of most commonly encountered insulated surfaces, such as boiler walls, flues, ducts, precipitators, air heaters, economisers, tanks, fans, etc. This publication is intended to assist the designer, contractor and plant engineer in understanding and solving the complexities involved in the design, fabrication and installation of sheet metal lagging systems.
Member $ 50.00
Non-member $ 95.00

Accepted Industry Practice for Sheet Metal Lagging – CD Version
ASB039-CD
$60.00$110.00
 
Reference   ASB039-CD
Title Accepted Industry Practice for Sheet Metal Lagging – CD Version
Edition
Details as per above description in CD version
Member $ 60.00
Non-member $ 110.00

Architectural Sheet Metal Manual-CADD Drawings
ASB040
$Free Download$185.00
 
Reference   ASB040
Title Architectural Sheet Metal Manual-CADD Drawings
Edition 2012
Details CADD drawings of the illustrations in SMACNA’s 7th edition of the Architectural Sheet Metal Manual are available for download and use in CAD programs. These drawings illustrate the best practices in custom architectural sheet metal work. Purchase individual files in DWG forms ( each for non-members) or get all 188 figures on a CD-ROM. Architects and designers are encouraged to use this invaluable resource to assure that their specifications reflect professionally vetted design details.
Member $ Free Download
Non-member $ 185.00

Seismic Restraint Manual – OSHPD Edition
ASB041
$120.00$235.00
 
Reference   ASB041
Title Seismic Restraint Manual – OSHPD Edition
Edition 1st Edition, 2009, 146 pages
Details This special edition of the SMACNA Seismic Restraint Manual – OSHPD Edition has been developed to meet the specific requirements of the California Office of Statewide Health Planning and Development (OSHPD) for hospital and health care facilities construction. The seismic hazard tables with this special edition are limited to the SHL A (g=0.67) and SHL AA (g=1.0) applicable to the hospital and health care facilities outlined in the use of the manual. The manual is not intended to cover the ordinary supports for ducts and pipes required for gravity loads. The only restraints shown in the tables and figures are those needed to provide the extra support for seismic loads.
Member $ 120.00
Non-member $ 235.00

Residential Sheet Metal Guidelines
ASB042
$65.00$125.00
 
Reference   ASB042
Title Residential Sheet Metal Guidelines
Edition 1st Edition, 2001, 130 pages
Details The first edition of SMACNA?s Residential Sheet Metal Guidelines offers contractors, designers, builders and homeowners a source of expert information on the proper fabrication and installation of exterior sheet metal in residential buildings. Covering topics that include roof drainage systems, decks, chimneys, windows, doors and ledges, the new manual presents details and explanations based on and designed for low-rise residential buildings, up to three stories, that are used as single-family and multi-family dwellings. The guide also highlights details commonly used in residential sheet metal work throughout the industry. In addition to generic detail drawings, design data and the appendixes will help users to adapt the drawings to local climate and project conditions. Carefully examining the information along with the local climate conditions will enable users to select the proper details for practically any residential architectural sheet metal application.
Member $ 65.00
Non-member $ 125.00

Residential Sheet Metal Guidelines – CD Version
ASB042-CD
$75.00$150.00
 
Reference   ASB042-CD
Title Residential Sheet Metal Guidelines – CD Version
Edition
Details as per above description in CD version
Member $ 75.00
Non-member $ 150.00

Round Industrial Duct Construction Standards
ASB045
$330.00$655.00
 
Reference   ASB045
Title Round Industrial Duct Construction Standards
Edition 2nd Edition, 1999, 648 pages
Details This American National Standard (ANSI) expands the scope of the 1977 version, updating original text to incorporate a revised theory of design, new materials and more “user friendly” tables. Offers a standardised, engineered basis for design and construction of industrial ducts of Classes 1 to 5. Includes a spiral duct chapter for Classes 1 and 2, covers design pressures ranging from 30” wg negative to 50” wg positive, plus carbon and galvanised steel tables. Changes to the manual include expanded tables for stainless steel and aluminium, expanded tables for duct sizes up to 96” in diameter, introduction of a new Duct Class 5 for systems handling corrosives and spiral lockseam pipe. As alternatives to table use, the publication has a manual calculation procedure using equations and fully developed examples. Includes soft metrics.
Member $ 330.00
Non-member $ 655.00

Sheet Metal Welding Guide
ASB046-CD
$50.00$95.00
 
Reference   ASB046-CD
Title Sheet Metal Welding Guide
Edition 3rd Edition, 2007, 174 pages
Details This publication and the wealth of information it contains are intended to assist contractors, estimators and shop supervisors in profitably managing the welding activity in a sheet metal shop. Updated coverage of welding processes; flux-cored wire guidelines; and the latest equipment. The safety chapter covers such items as health effects, hazard controls and safety procedures. Other chapters include guidelines for developing welding procedures, controlling weld quality, estimating, hiring and training welders and welder certification.
Member $ 50.00
Non-member $ 95.00

Sheet Metal Welding Guide – CD Version
ASB046-CD
$60.00$110.00
 
Reference   ASB046-CD
Title Sheet Metal Welding Guide – CD Version
Edition
Details as per above description in CD version
Member $ 60.00
Non-member $ 110.00

Architectural Sheet Metal Inspection Guide
ASB048
$40.00$70.00
 
Reference   ASB048
Title Architectural Sheet Metal Inspection Guide
Edition 1st Edition, 2004, 52 pages
Details An invaluable inspection resource for owners of standing seam, batten seam, or Bermuda-type roofs. Presents practical troubleshooting and corrective tips for typical problems of roof panels, gutters, downspouts, fascia, copings, flashing, ridges and hips, valleys, expansion joints, penetractions, fasteners and soldering. Also provides relevant information regarding construction of these architectural elements, the purpose of each, as well as what to look for during periodic inspections. Sealants, moisture transfer methods and air leakage are also covered. Emphasizes the importance of regular and appropriatedly timed inspections because a small problem discovered early can be fixed at a low cost, preventing minor damage from becoming a sustantial problem until the cost of repair and remediation becomes excessive. Contractors will find this book a valuable resource to provide owners or facility managers along with the standard building completion documents.
Member $ 40.00
Non-member $ 70.00

Architectural Sheet Metal Inspection Guide – CD Version
ASB048-CD
$45.00$80.00
 
Reference   ASB048-CD
Title Architectural Sheet Metal Inspection Guide – CD Version
Edition 1st Edition, 2004, 222 pages
Details as per above description in CD version
Member $ 45.00
Non-member $ 80.00

SMACNA CD-ROM Technical Manual Collection
ASB043
$2795.00$5585.00
 
Reference   ASB043
Title SMACNA CD-ROM Technical Manual Collection
Edition 1st Edition, 2007
Details Thirty of SMACNA’s most requested technical manuals are conveniently located in PDF format with searchable indexes on one CD-ROM. Purchase the entire set for substantial savings. Among the titles are HVAC Duct Construction Standards – Metal & Flexible; Fire, Smoke & Radiation Damper Installation Guide for HVAC Systems; Indoor Air Quality – A Systems approach; and Round Industrial Duct Construction Standard.
Member $ 2795.00
Non-member $ 5585.00

HVAC Sound and Vibration Manual – CD Version
ASB049
$100.00$195.00
 
Reference   ASB049
Title HVAC Sound and Vibration Manual – CD Version
Edition 1st Edition, 2004, 222 pages
Details <span>This first edition of HVAC Sound and Vibration was developed to provide in-depth, HVAC-specific guidance in the art of sound and vibration measurement and mitigation. As building construction has become lighter and tighter, sound and vibration that previously may have gone unnoticed is more often becoming a nuisance. This creates both a problem and an opportunity – a problem because designers and installers must be diligent in using materials and techniques that mitigate the potential for sound and vibration problems and an opportunity for contractors that specialise in resolving occupant complaints related to sound and vibration.</span>
Member $ 100.00
Non-member $ 195.00

TAB Procedural Guide
ASB050
$45.00$85.00
 
Reference   ASB050
Title TAB Procedural Guide
Edition 1st Edition, 2003, 116 pages
Details <span>The TAB Procedural Guide is intended for trained TAB technicians to assure that the appropriate procedures are employed in an effective manner. This new publication includes general as well as specific guidance for both air and water side HVAC system adjusting and balancing. Variable air volume, multi-zone, dual duct and exhaust air systems are examples of the systems specifically covered and time-saving forms are included for precise record keeping during the conduct of a TAB project. The guide assists TAB technicians with preplanning and establishing teams so that energy use is minimised whether the work is done in new or existing buildings.</span>
Member $ 45.00
Non-member $ 85.00

TAB Procedural Guide-CD Version
ASB050-CD
$55.00$105.00
 
Reference   ASB050-CD
Title TAB Procedural Guide-CD Version
Edition
Details as per above description in CD version
Member $ 55.00
Non-member $ 105.00

The Specialist Contractor’s Handbook
AMCA NSW 002
$38.50$82.50
 
Reference   AMCA NSW 002
Title The Specialist Contractor’s Handbook
Edition 4th edition
Details This 155 page handbook has been revised by John Pilley and Vin Eddy of Pilley McKellar Solicitors with input from Hank Laan and Steven Zorbas, and is an essential tool for all those involved in the subcontracting industry.
Member $ 38.50
Non-member $ 82.50

AMCA Site Diary
AMCA NSW 001
$48.40$96.80
 
Reference   AMCA NSW 001
Title AMCA Site Diary
Edition
Details
Member $ 48.40
Non-member $ 96.80

Site Diary (50 days)
AMCA-001
$48.40 $96.80
 
Reference   AMCA-001
Title Site Diary (50 days)
Edition
Details
Member $ 48.40
Non-member $ 96.80

The Specialist Contractor’s Handbook
AMCA-012
$38.50$82.50
 
Reference   AMCA-012
Title The Specialist Contractor’s Handbook
Edition 4th Edition
Details This 155 page handbook has been revised by John Pilley and Vin Eddy of Pilley McKellar Solicitors with input from Hank Laan and Steven Zorbas, and is an essential tool for all those involved in the subcontracting industry.
Member $ 38.50
Non-member $ 82.50

AMCA Site Diary (large)
N/A
$55.00N/A
 
Reference   N/A
Title AMCA Site Diary (large)
Edition
Details
Member $ 55.00
Non-member $ N/A

AMCA Site Diary (Small)
AMCA-002
$15.00$26.00
 
Reference   AMCA-002
Title AMCA Site Diary (Small)
Edition
Details
Member $ 15.00
Non-member $ 26.00

AMCA Service Log Book
AMCA-003
$7.70$17.60
 
Reference   AMCA-003
Title AMCA Service Log Book
Edition
Details
Member $ 7.70
Non-member $ 17.60

OHS Checklist – Factory
AMCA-004
$5.50$22.00
 
Reference   AMCA-004
Title OHS Checklist – Factory
Edition
Details
Member $ 5.50
Non-member $ 22.00

OHS Checklist – On-site
AMCA-005
$5.50$22.00
 
Reference   AMCA-005
Title OHS Checklist – On-site
Edition
Details
Member $ 5.50
Non-member $ 22.00

OHS Incident Report Forms (pack 20)
AMCA-006
$5.50$22.00
 
Reference   AMCA-006
Title OHS Incident Report Forms (pack 20)
Edition
Details
Member $ 5.50
Non-member $ 22.00

Human Resources Manual
AMCA-008
$49.50$49.50
 
Reference   AMCA-008
Title Human Resources Manual
Edition
Details
Member $ 49.50
Non-member $ 49.50

NEBB Photocopy Paper (200 sheets)
AMCA-010
$27.50N/A
 
Reference   AMCA-010
Title NEBB Photocopy Paper (200 sheets)
Edition
Details
Member $ 27.50
Non-member $ N/A

Job Safety Analysis Workbooks
AMCA-011
$10.00$22.00
 
Reference   AMCA-011
Title Job Safety Analysis Workbooks
Edition
Details
Member $ 10.00
Non-member $ 22.00

Conditions of Site Requirement
CSR-94
$No ChargeN/A
 
Reference   CSR-94
Title Conditions of Site Requirement
Edition
Details
Member $ No Charge
Non-member $ N/A

Special Conditions of Contract
SCC8
$No Charge$-
 
Reference   SCC8
Title Special Conditions of Contract
Edition
Details
Member $ No Charge
Non-member $ -

Standard Terms & Conditions of Supply of Goods or Equipment
SGE-12
$No ChargeN/A
 
Reference   SGE-12
Title Standard Terms & Conditions of Supply of Goods or Equipment
Edition
Details
Member $ No Charge
Non-member $ N/A

Service Maintenance Agreement
SMA
$No ChargeN/A
 
Reference   SMA
Title Service Maintenance Agreement
Edition
Details
Member $ No Charge
Non-member $ N/A

Specialist Contractor’s Handbook (New)
AMCA-012
$38.50$82.50
 
Reference   AMCA-012
Title Specialist Contractor’s Handbook (New)
Edition 4th Edition, 2007
Details This 155 page handbook has been revised by John Pilley and Vin Eddy of Pilley McKellar Solicitors with input from Hank Laan and Steven Zorbas, and is an essential tool for all those involved in the subcontracting industry.
Member $ 38.50
Non-member $ 82.50

AMCA Publication Price List

Click on the Stock Reference for more detail

AMCA Conditions of Purchase
  • No Refund or Exchange
  • Prices Subject to change without notice
  • Pre-payment is required on all purchases
  • Allow 2-3 weeks for delivery
  • All prices quoted include GST
  • A tax invoice will be issued upon order of goods
  • AMCA Price = Members of AMCA
  • Normal Price = Recommended Retail Price
  • Show:
Description Prices $ Stock Ref. Member Non-Member

SMACNA Publication Price List

Click on the Stock Reference for more detail

SMACNA Conditions of Purchase
  • NOTE: SMACNA technical manuals purchased in CD
  • No Refund or Exchange
  • Prices Subject to change without notice to allow for Foreign Exchange Rate fluctuations
  • Pre-payment is required on all purchases
  • Allow 2-3 weeks for delivery
  • All prices quoted include GST
  • A tax invoice will be issued upon order of goods
  • SMACNA Price = Members of SMACNA Victorian Chapter
  • Discounted Price = Members of AMCA, NEBB, AIRAH, AGA, ASHRAE, SA
  • List Price = Recommended Retail Price
Description Prices $ Stock Ref. SMACNA List

NEBB Publication Price List

To Purchase any NEBB Publication please contact NEBB Australia.